What You'll Need:
+ 1/8-inch-thick acid-free paperboard
+ White glue, a special synthetic glue available from art stores or bookbinding suppliers
+ Four sheets of decorative or handmade paper and 20 sheets of white, ivory, or cream paper
+ 1/4 yard of bookbinding cloth
+ Two yards of strong ribbon that won't fray easily
+ Needle with a large eye
+ Hammer and four nails
+ Cutting board and metal ruler
+ Your favourite photos
1. Cut the 20 sheets of paper to fit your book's desired size (in this case, 11" x 15"). Your book can be as thick or thin as you like, depending on your taste and budget. I chose this size because it's half the size of the paper I bought, so I could just fold the sheets in half and cut along the fold.
2. Cut two pieces of paperboard for the book's front and back covers. Add 1/4 inch to the size you've chosen for the inner sheets (11 1/4" x 15 1/4" in our example). Then, cut a strip from each cover that measures about a fifth of the cover's width. This book is 15 1/4" wide, so I'll cut off a 2 1/2" or 3" strip. You now have two pieces of each cover. The two thin strips will be the binding strips, the area of the cover where the book is bound together.
3. Cut out two pieces of bookbinding cloth that are big enough to cover the binding strip and extend a couple of inches into the other piece of the cover, leaving one full inch all the way around to fold over. Our cloth measures 13 1/2" x 6 1/4."
4. Lay newspaper over your work area. Align the two pieces of board (binding strip and main board) spaced 1/4 inch apart. Glue the cloth to the board, making sure to leave 1/4 inch between the pieces and allow the one-inch border of extra cloth to hang over. Flip the glued board over, neatly fold over the cloth edges, and glue them down. (Tip: It helps to trim the corners for a neat fold.) Repeat this step for the back binding strip and cover.
5. Next, cut the paper for both book covers. The pieces should overlap the point where the bookbinding cloth ends by an inch; leave an inch on the other three sides for folding over (for our book, 11 3/4" x 13 1/2"). Glue the paper to the front of both covers, then fold it over and glue the one-inch edges to the inside. At this point, you have one side of both the front and back covers completed.
6. To make the inside of the covers neat, attach a sheet of decorative paper to hide the folds. Cut two pieces of paper (about 1/4 inch less than the size of the covers), and glue one piece into each cover.
7. Whew! You made it this far -- now it's time to put everything together. It's a nice touch to use a sheet of decorative paper for the first and last book pages. Gather the papers for your book and place them, like a sandwich, between the two covers. Make sure they are neatly arranged. Hammer four evenly distributed holes in the center of the front cover's binding strip. (Tip: Leave a nail in each hole to keep everything lined up.) Tightly thread ribbon, jute, or string through the holes, as simply or as elaborately as you like.
8. Now add your photos with double sided tape within your guest book. You can also add photo corners to add an extra special touch. These can be purchased at Walmart, Michaels or any scrapbooking store.
9. If you like, you can also buy pretty paper frames and put them around your photos or around the areas where you want your guests to write.
10. And you’re done!
Read more: DIY Reception Ideas: DIY Wedding Guest Books - TheKnot.com
Photo books make great memories! If you order digital prints, use them to make one using these following sites. All you have to do is: Upload your photos, edit the content, and click order! They are often customizable to suit your needs, require almost no effort and are gorgeous.
Shutterfly
Mix Book
Walmart Photocentre
What You'll Need:
+ 8.5″x11″ Sage cardstock from Michael's or online at http://www.paper-source.com
+ 5×7 envelopes, also from Michael's or online at http://www.paper-source.com
+ Double-sided tape
+ MS PowerPoint (or Photoshop, inDesign or Illustrator)
+ Color printer
Instructions:
To create the collage:
1. Start by drawing a 5.5″x8.25″ white box in PowerPoint. To do this, go to “Insert –> Picture –> Autoshapes”. This should pull up the autoshape menu. Click on the button with the shapes, select the rectangle, and draw it on your slide.
2.Right-click and go to “Format Autoshape”, which takes you to various options that allow you to specify the size and color.
3. Once you have done this, insert your photos into MS PowerPoint by accessing the “Insert” menu and selecting “From File…” Select the files. This can get a little messy if your photos are very large. You may have to patiently find the corners of the photos and then resize each one so that you can see them all on one slide.
4. Once you have inserted all of your photos and can see them all, you can adjust the size of each image and arrange them inside the white rectangle as you prefer.
5. To insert text, go to “Insert –> Text Box”. Click somewhere outside your white box, and then type out the main message (which was just a simple “thank you” on the front in our case). Highlight the text, right-click, and select “Fonts”. Tip: Try to use a font that matched the one used on your invitations. Once you have chosen the color and sized the text appropriately, click on the edge of the text box and drag it to the location you want the text to appear.
6. At this point, everything on your collage should be in place. Click outside the white box, drag over everything, and let go. This selects every object on your slide. Right-click and go to “Grouping –> Group”. Then right-click again and select “Save as Picture”. Save it as a .jpg file.
7. The whole collage has now been turned into an image that you can edit and upload for printing. It can also be scaled for 4″x6″ photos. You can now bring your image to any print shop or upload them on their website. Tip: Try using a matte paper or even a paper with a linen finish for a fancier effect.
To create the backing:
1. Cut the card stock to the size of 9″ x 6.5″. Call around, you may be able to find a place that can cut the entire stack for you.
2. In PowerPoint, draw a 6.5″ tall and 9.0″ wide rectangle, in the same way as you did in steps 1-2 for the photo collage. Format the box (right-click on the box) and select “Format Autoshape” to have a clear fill and for the outline to be a dotted 0.25″ very light gray line.
3. Create the text using text boxes (see step 5 under the collages). Rotate the text boxes and arrange them as follows:
(photo 5)
4. Next, do a test print using regular white paper with you printer. This allows you to figure out how to feed your already-cut card stock into the printer.
Tip:
Check your printer for its settings, it’s possible that you may only have the option of inserting your pre-cut sheets flushed to one of the sides of the paper feeder. The test print may help you figure out that the box you draw on Powerpoint needs to be flushed to the other side of the slide (see image above).
5. After you’ve finished your test prints (hopefully it only takes you one try!), insert your pre-cut card stock into the printer and print however many copies you need!
6. And the last step, of course, is to mount the 4″x6″ photos on to the card stock, fold in half and write out your personal messages inside!
Tip: Try using Scotch’s double-sided photo safe permanent tape, it’s less expensive than mounting squares.
Remember, it’s more time consuming to write out your individual handwritten messages than it will be to make these cards, so make sure you allow enough time if you have a time frame in mind for sending out your thank you cards.
Written By Andrée and Heather, Wed By Hand Coordinators
No comments:
Post a Comment